Elcometer 112/3236濕膜測厚儀易高Elcometer│112/3236六角濕膜測厚儀

產品簡介

英國易高Elcometer 112和3236六角濕膜梳精密的六角不鏽鋼材質，經久耐用，可重復使用，厚度範圍Z高可達 3000μm (120mils).這些六邊濕膜梳的大小各不相同，有24或36個測量值可選，根據型號不同，有增加的精確度可選.

產品型號：112/3236六角濕膜梳

更新時間：2017-07-16

廠商性質：代理商

訪問量：2389

產品咨詢

詳細介紹在綫留言

品牌	ELCOMETER/英國易高

Elcometer Wet Film Measurement

如有任何問題請與我司業務專員：
：豪
:[email protected]

英國易高Elcometer 112和3236六角濕膜梳使用精密的六角不鏽鋼材質，經久耐用，可重復使用，厚度範圍zui高可達 3000μm （120mils）.

這些六邊濕膜梳的大小各不相同，有24或36個測量值可選，根據型號不同，有增加的精確度可選.

使用濕膜梳

將濕膜梳垂直放置，接觸到基體。保持原地等待幾秒鐘，直到梳齒變濕。拿開濕膜梳.

濕膜厚度在"含漆"或"濕"齒zui大值和"不含漆"或"幹"齒zui小值之間
How to use a Wet film Comb -

ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.

Wet film combs have teeth of various lengths on their sides.

Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.

The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value

Example

In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou.

If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement.

To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe.

On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.

Elcometer 112和3236六角濕膜梳

範圍	厚度值	部件編號
20 - 370μm	20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 150, 170, 190, 210, 230, 250, 270, 290, 310, 330, 350, 370μm	K0003236M201
25 - 2000μm	25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000μm	K0003236M202
25 - 3000μm	25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, 3000μm	B112----1B
0.5 - 15mils	0.5, 0.75, 1.0, 1.25, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12, 13, 14, 15mils	K0US3236M203
1 - 80mils	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, 75, 80mils	K0US3236M204
1 - 120mils	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 45, 50, 55, 60, 70, 80, 90, 100, 110, 120mils	B112----2B